Cleaning toilets and bathrooms requires a high level of sanitation. For example, when cleaning tiles you may encounter ingrained dirt and limescale, so it is important to choose the correct cleaning products for the task.

How to clean the toilet

Start by cleaning the inside of the bowl with a toilet bowl cleaner. You can advantageously use one of the following products: Flydende toiletrens off., Neutral toilet off., Flydende toiletrens off. med farve. Avoid pre-flushing; spray onto the dry surface and into the flush water, and let it work for a few minutes. Then use a brush and flush.

How to clean and sanitize surfaces

When cleaning external surfaces in the bathroom such as toilets, washbasins, tiles and ceramic floors, choose one of the following cleaning agents: Neutral sanitet pro, Neutral sanitet off. or Sanitet. These products all contain limescale binders that leave a thin dirt-repellent film and dry streak-free. This makes the next cleaning easier and minimizes the use of limescale removers. Microfiber cloths and mops are recommended. Mirrors are cleaned with clean water and a microfiber cloth.

How to use foam systems

Bathrooms

1. Fill the container with Alkalisk skumrengøringsmiddel pro/off.
2. Foam an area (approx. five minutes dwell time).
3. Use a brush or a blue scouring sponge for vertical surfaces and, if needed, a floor scrubber for floors.
4. Rinse off with clean water.
   

Periodic cleaning

1. Remove any limescale with Surt skumrengøringsmiddel pro/off. in the container.
2. Finish with Neutral sanitet pro or Neutral sanitet off.

Use the blue nozzle. Normally Alkalisk skumrengøringsmiddel pro/off. is used four times per week and Surt skumrengøringsmiddel pro/off. once per week. In areas where the hardness of the tap water is high or in bathrooms with underfloor heating, it may be necessary to increase the frequency of using Surt skumrengøringsmiddel pro/off. to twice per week.